DCK 01: THE ALL-IN-ONE
SLS POST PROCESSING TOOL

If you own at least one SLS® or MJF®3D printer, you already know how time-consuming the manual de-caking and parts cleaning of your build are. The monthly hours your team will spend in this trivial yet crucial part of your production workflow can be huge.

And we know that your operators can use their time in much more useful, profitable ways.

Automation is the key to optimize production and boost your additive manufacturing department’s economic performance, allowing you to spare an average of 80 to 100 hours per month manpower for each 3d printer you have.

See in the video how it works: automatic unpacking and cleaning a 27 liters PA 12 parts-cake in less than 50 minutes.

ONE SYSTEM, FIVE TASKS

Our A.M. expertise, together with our IntegrAM partners’ extensive surface treatment know-how, brought to life the DCK 01 System: the definitive, all-in-one SLS® post-processing solution for midsized printers and high production environments.

DCK 01: Automatic unpacking and depowdering system for SLS and plastic powder bed 3D printers

1: De-caking

Automatic, gentle destructuration of your build
DCK 01: Automatic unpacking and depowdering system for SLS and plastic powder bed 3D printers

2: Cleaning

Automated depowdering process (patented)
DCK 01: Automatic unpacking and depowdering system for SLS and plastic powder bed 3D printers

3: Finishing

Surface smoothing cycles
DCK 01: Automatic unpacking and depowdering system for SLS and plastic powder bed 3D printers

4: Powder recovery

Efficient used powder recovery, with automatic sieving
DCK 01: Automatic unpacking and depowdering system for SLS and plastic powder bed 3D printers

5: Mixing

2-cycles, optional mixing system

THE FEATURES

  • Operating volume: up to 36 liters
  • Automatic de-caking
  • Self-regulating used powder recovery
  • Automatic part cleaning by a patented blast & tumble process
  • Environment- friendly surface finish process (no chemicals)
  • No air-extraction system needed
  • Customizable processing programs via Touch-screen to PLC interface
  • ATEX compliant system
  • Industry 4.0 ready
  • Footprint: 200 x 115 x 210 cm
  • Requirements: 4 bars comp. air, 380V

Extras and add-ons

  • Casing for improved acoustic comfort and reduced powder fly-by
    [DCK 01 C model]
  • Integrated 2-cycles mixing and sieving system
  • Powder conveying system
DCK 01: Automatic unpacking and depowdering system for SLS and plastic powder bed 3D printers

RETURN-ON-INVESTMENT SIMULATION

  The break-even we calculated is expressed in months after the purchase of the system.

For 32 liters’ daily production

Eg: 1 x Prodways ProMaker P1000 X
or 2 x EOS Formiga Velocis

24m (DCK 01 C)
15m (DCK 01)

For 69 liters’ daily production

Eg: 1 x EOS P396
or 1 x Farsoon 403P

15m (DCK 01 C)
10m (DCK 01)

For 85 liters’ daily production

Eg: 1 x EOS P396
+ 1 x EOS Formiga Velocis

11m (DCK 01 C)
7m (DCK 01)

All trademarks, logos and brand names are the property of their respective owners

WRITE US TO KNOW MORE ABOUT THE DCK-01